Eden have always aimed to produce the ultimate professional bass amplifiers, built to withstand the physical, musical and often unexpected demands of touring. World Tour amplifiers were Eden's flagship range for decades. Many are still being used by professional musicians around the world.
The most recent generation of World Tour amplifiers (WT800, WT550 & WP100) were superseded by the World Tour Pro range in 2015.
Click on a model number for more information, images, and to download the relevant handbook.
If the model you are looking for is not listed here, please contact info@edenamps.com for further assistance.
- Input Jack
- Gain Control
- Compressor
- Enhance Control
- Bass Control, Quasi-Parametric EQ & Treble Control
- Headphone Out
- Effects Loop
- DI Out w/ Level & Ground Lift
| Power | 300W @ 4Ω / 175W @ 8Ω |
|---|---|
| Dimensions | W: 12" H: 3.5" D: 13" |
| Weight | 13 lbs |
- A dbx style compressor with adjustable threshold
- Dual inputs
- Enhance control
- Optically coupled dynamic smart booster for bass and treble
- Multiple patch points & auxiliary inputs
- Variable distortion
- Pre/post DI section
- Built in practice mode.
These products were discontinued in 2006.
| Power | 230W @ 8Ω / 330W @ 4Ω / 420W @ 2Ω RMS |
|---|---|
| Distortion | <.05% |
| Freq. Response | 10Hz - 15KHz ±2dB |
| Dimensions | W: 13" H: 3.5" D: 12.5" |
| Weight | 13 lbs |
- Compact and light
- Enhance control
- EQ controls including two shelving and three semi-parametrics
- Automatic compression with bypass switch
| Power | 235W @ 8Ω / 400W @ 4Ω RMS |
|---|---|
| Distortion | <.1% |
| Freq. Response | 10Hz - 15KHz ±2dB |
| Dimensions | W: 12" H: 3.5" D: 12" |
| Weight | 13 lbs |
- Dual inputs
- Simplified control section with mid shift and bypass.
- Dbx style compressor with adjustable threshold
- Enhance control
- Dynamic smart booster for bass and treble
- Multiple patch points
- Variable distortion
- Pre/post DI section
- Built in practice mode
This product was discontinued in February 2010.
| Power | 405W @ 4Ω |
|---|---|
| Distortion | <.05% |
| Freq. Response | 10Hz - 15KHz ±2dB |
| Dimensions | W: 13" H: 3.5" D: 12" |
| Weight | 17 lbs |
Rated at 300 watts per side into 4 ohms (600w bridged into 8), the WT-600 Road Runner is Ideal for running Bridge mono into a Hi power speaker enclosure for a maximum performance compact rig.
The WT600 has all the features of the WT800.
This product was discontinued in August 2004.
| Power | 2x 300W @ 4Ω |
|---|---|
| Distortion | <.1% |
| Freq. Response | 10Hz - 18KHz ±2dB |
| Dimensions | W: 17" H: 3.5" D: 12" |
| Weight | 22 lbs |
Each channel is equipped with a:
- Volume control
- Tone shift control
- Output limit level indicator.
The WT1000 can operate in Dual Mono, True Stereo & Mono Bridged modes.
This product was discontinued in August 2004.
| Power | 450W @ 4Ω |
|---|---|
| Distortion | <.06% |
| Freq. Response | 13Hz to 36KHz +/- 3dB |
| Dimensions | W: 19" H: 3.5" D: 14" |
| Weight | 28 lbs |
- Dual 7025 preamp tubes drive two separate channels that can be used individually or blended.
- Each channel features Dynamic Bass and Treble boosters, a unique EQ center (4-band on Ch. 1, 3-band w/ sweepable mid on Ch.2), dual effects loops (pre and post) and variable compression.
The WT1205 was discontinued in 2012.
| Power | 2 x 500W @ 4Ω/600W @ 2Ω |
|---|---|
| Power Mono Bridge | 1200/1000W RMS 4/8Ω |
| Freq. Response | 10Hz-20KHz ±2dB |
| Dimensions | W: 17" H: 3.5" D: 13" |
| Weight | 26 lbs |
- Front-panel bridged/stereo switch
- 2 channels
- Balanced inputs
- 1/4", binding post, and NL-4 outputs
- Automatic output limiting
- International voltage selection and tone balance
This amplifier was discontinued in 2005.
| Power | 2x430W RMS @ 4Ω |
|---|---|
| Power Mono Bridge | 1250W RMS @ 4Ω |
| Freq. Response | 10Hz - 20KHz ±2dB |
| Dimensions | W: 17" H: 3.5" D: 14.5" |
| Weight | 28 lbs |
- Torroidal power supply
- All-tube preamplifier section
- Full tube-tone controls
- Tube bridging circuits
- Fully balanced in and out
- 1/4" and NL4 speaker connections
- Auto limiting
- Multiple safety systems
This product was discontinued in August 2003.
| Power | 2x750W RMS @ 2Ω / 600W RMS @ 4Ω |
|---|---|
| Power Mono Bridge | 1550W RMS |
| Freq. Response | 10Hz - 20KHz ±2dB |
| Dimensions | W: 17" H: 3.5" D: 14.5" |
| Weight | 32 lbs |
| Power | 230W @ 8Ω / 330W @ 4Ω / 420W @ 2Ω |
|---|---|
| Speaker Config | 1x2" EC1260ME Cast Frame speaker with E2700 Tweeter |
| Freq. Response | 32Hz -14KHz |
| Sensitivity | 103dB |
| Crossover | 2.5KHz @ 18dB |
| Dimensions | W: 21.75" H: 19.25" D: 14.5" |
| Weight | 49 lbs |
The DC112XLT combined the popular Time Traveler amplifiers with the D112XLT speaker cabinet.
The DC112XLT is equipped with a spring loaded flip down support foot that lets you kick back the unit for perfect near field, high angle positioning.
Back To Series
- Each channel includes an independent effects loop
- Switchable automatic compression
- 5-way semi-parametric tone control,
- Electronic crossover
- Aux input & headphone out
- Internal speaker on/off
- -12dB input pad
Back To Series
| Power | 300W @ 8Ω/500W @ 4Ω/750W @ 2Ω |
|---|---|
| Speaker Config | 2x10" EC-1060XL Cast Frame speakers with E2700 Tweeter |
| Freq. Response | 48Hz - 14KHz ±2dB |
| Crossover | 3.5KHz @ 18dB |
| Dimensions | W: 23" H: 24" D: 18.5" |
| Weight | 78 lbs |
